DESCRIPTION
Silastic 732 is a high performance, one-part silicone sealant that offers excellent adhesion (usually without a primer), elasticity, wide temperature resistant and long life reliability.

IMPORTANT FEATURES
1. A Dow Corning (owners of Silastic & Molykote Brands) product.
2. Ease of use - one part, no mixing required, Non slumping, Non shrinking.
3. Does not crack, crumble or dry out in direct Sunlight.
4. Excellent temperature range -65°C to +232°C.
5. Meets FDA requirement No : 21 CFR 177-2600 (food contact), MIL-A-46106 parts I & II.
6. Bonds almost all surfaces.
7. Chemically stable.

COLOURS
Clear, Black & White.

USES
1. Gasketing in heating & refrigerating units, fixing screwless brackets or name plates and tacking plastic materials to metals.
2. Sealing windows in oven doors and flues on gas appliances, flanged pipe joints, access doors.
3. Formed in place of gaskets for gearboxes, compressors and pumps.
4. Sealing trailers, truck cabs.
5. Bonding and sealing appliance parts.
6. Anti abrasion coating.
7. Sealing of marine cabins and windows.
8. Filling and caulking joints in sheet metals stacks, duct work and equipment housings.

LIMITATIONS
On contact, uncured sealant may cause irritation, avoid contact with eyes and skin.

PACKING
100 GM tube & 300 GM cartridges (Suitable Caulking guns available).

TYPICAL PROPERTIES
Flow, sag or sump - nil
Tack free time at 25°C & 50 % RH - 10 to 20 min.
Cure time at 25°C & 50 % RH -1 to 2 days

After curing for 7 days

ASTM D 676 - Durometer Hardness, Shore A - 30
ASTM D 412 - Ultimate Tensile Strength - 350 psi (mpa)
ASTM D 412 - Elongation % - 500

CAUTION
Users are advised to conduct their own tests to check suitability to specific applications.